HOME 　　　　　JAPANESE

■ Burrs and chips left on the sheared edges a panel will cause the following problems

1. Pattern disconnections and short-circuits during the printing process

2. Contaminations in the liquid solder resisit during the coating process

3. Cracks and peels of dry films during the plating process

To minimize those problems, extreamly smooth finishes are required.Through beveling system.

burrs should be removed from the sheared edge.
Auto Edge Beveling Machine ( 4 edges )
This automated edge beveling system requires no
set changes up to panel thickness 0.27mm.
This system is designed under the following
considerations : Safety, noise, suppression, and
efficient dust extraction
Auto Edge Beveling Machine ( 2 edges )
This automated edge beveling system bevels two
edges of a panel in one operation.
With the use of diamond blades, an ideal surface
finish can be obtained.
Auto Edge Beveling Machine ( 4 edges )
This automated edge beveling system bevels
4edges of panel in one operation.
High-through put / 7000 panel for one day
Edge-Beveler
This is an compact edge beveler and it can be
chamfered gold fingers when replacing cutter
Gold-Edge-Beveler
It chamfers Gold Fingers and ensures smooth
and clean fingers ( gold connectors)

HOME 　　　　　JAPANESE