Achieving high-precision outer perimeter cutting and chamfering before reference hole processing with X-ray inner layer mark recognition

The MRX-700A is a high-speed multi-cut former that recognizes inner layer marks with X-rays and performs outer perimeter cutting and chamfering after multi-layer pressing, before reference hole processing. It adopts the same cutting and chamfering unit as the MRC-700A, which has a proven track record of numerous deliveries, achieving high-precision substrate processing.

X-ray image recognition device
X-ray measurement device image

Features of MRX-700A

  • Simplification of processes and shortening of lines
    • By immediately performing outer perimeter cutting and chamfering after lamination pressing, subsequent processes are simplified.
    • When automatically linked with a reference hole processing machine, a pre-alignment device is not required, allowing for line shortening and cost reduction.
  • Improved processing accuracy and contribution to subsequent processes
    • By performing reference hole processing after outer perimeter cutting, the vertical accuracy of the holes is improved, contributing to high-definition circuit formation.
    • Enables stable surface polishing for IVH substrates and similar.
  • Highly reliable processing unit based on proven track record
    • The cutting and chamfering unit inherits the technology of the MRC-700A, which has a proven track record of numerous installations.

Applications and Benefits of MRX-700A

  • Applications: Outer perimeter cutting and chamfering after lamination pressing, and manufacturing processes for IVH substrates, etc.
  • Benefits of Introduction: Line shortening and cost reduction due to no need for a pre-alignment device, and quality improvement through enhanced vertical accuracy of reference holes.

MRX-700A Product Specifications

ItemDescription
Product NameMRX-700A High-Speed Multi-Cut Former with X-ray Inner Layer Mark Recognition for Processing Reference
Max. Workpiece Size700mm (Length) × 700mm (Width)
Min. Workpiece Size255mm (Length) × 310mm (Width)
Board Thickness0.3mm - 2.4mm (*Value when the board has no warpage or distortion)
Processing Tact TimeAround 12 seconds/sheet (*Actual value when processing a workpiece of 500mm x 500mm outer dimensions, 0.8mm board thickness, at a processing speed of 35m/min)
Outer Dimension AccuracyWithin ±0.1mm
Parallelism with each side edgeWithin ±0.1mm
Accuracy from reference mark to each sideWithin ±0.15mm (*Value when the board has no warpage or distortion)
Positioning CapabilityPositioning by 16-axis servo motor
Cutter Rotation Speed11,400rpm (Variable)
Cutting Speed35m/min (Variable)
Power Supply3-phase AC200/220V 33.4KVA / 96.86A
Air Consumption290Nl/min. 0.5MPa.
Machine Outer Dimensions2,250(W)×5,250(L)×1,855(H)mm
Machine WeightApprox. 6,600kg

Inquire by Phone

053-414-6111

Business Hours: 9:00 - 17:00


Inquire by Email