Achieving high-precision outer perimeter cutting and chamfering before reference hole processing with X-ray inner layer mark recognition

The MRX-700A is a high-speed multi-cut former that recognizes inner layer marks with X-rays and performs outer perimeter cutting and chamfering after multi-layer pressing, before reference hole processing. It adopts the same cutting and chamfering unit as the MRC-700A, which has a proven track record of numerous deliveries, achieving high-precision substrate processing.


Features of MRX-700A
- Simplification of processes and shortening of lines
- By immediately performing outer perimeter cutting and chamfering after lamination pressing, subsequent processes are simplified.
- When automatically linked with a reference hole processing machine, a pre-alignment device is not required, allowing for line shortening and cost reduction.
- Improved processing accuracy and contribution to subsequent processes
- By performing reference hole processing after outer perimeter cutting, the vertical accuracy of the holes is improved, contributing to high-definition circuit formation.
- Enables stable surface polishing for IVH substrates and similar.
- Highly reliable processing unit based on proven track record
- The cutting and chamfering unit inherits the technology of the MRC-700A, which has a proven track record of numerous installations.
MRX-700A Product Specifications
| Item | Description |
| Product Name | MRX-700A High-Speed Multi-Cut Former with X-ray Inner Layer Mark Recognition for Processing Reference |
| Max. Workpiece Size | 700mm (Length) × 700mm (Width) |
| Min. Workpiece Size | 255mm (Length) × 310mm (Width) |
| Board Thickness | 0.3mm - 2.4mm (*Value when the board has no warpage or distortion) |
| Processing Tact Time | Around 12 seconds/sheet (*Actual value when processing a workpiece of 500mm x 500mm outer dimensions, 0.8mm board thickness, at a processing speed of 35m/min) |
| Outer Dimension Accuracy | Within ±0.1mm |
| Parallelism with each side edge | Within ±0.1mm |
| Accuracy from reference mark to each side | Within ±0.15mm (*Value when the board has no warpage or distortion) |
| Positioning Capability | Positioning by 16-axis servo motor |
| Cutter Rotation Speed | 11,400rpm (Variable) |
| Cutting Speed | 35m/min (Variable) |
| Power Supply | 3-phase AC200/220V 33.4KVA / 96.86A |
| Air Consumption | 290Nl/min. 0.5MPa. |
| Machine Outer Dimensions | 2,250(W)×5,250(L)×1,855(H)mm |
| Machine Weight | Approx. 6,600kg |
