Achieving high-precision interlayer positioning and welding of ±15μm by integrating CCD camera image processing and electromagnetic induction heating

InduBond® PLR is a new generation of equipment developed for mass lamination of multi-layer boards and continuous lamination build-up processes. All processes, including "multi-layer board stacking," "camera-based interlayer positioning," and "final welding," are performed within the unit. By recognizing target marks through CCD camera image processing, it eliminates mechanical errors caused by conventional pins and reference holes, achieving extremely high positioning accuracy.

Features of InduBond PLR

  • Ultra-high precision positioning with a new optical tracing system
    • Using up to 8+4 CCD cameras, it simultaneously performs front and back image recognition and shape measurement for each layer. By tracing inner layer materials with a tolerance of ±15μm, it achieves accuracy surpassing conventional pin lamination technology.
  • Reduction of mechanical errors and costs
    • Eliminates the need for reference hole punching and drilling processes after etching. Pins, bushings, and jig plates with tools are also unnecessary, significantly reducing manufacturing and maintenance costs.
  • Highly flexible welding settings and advanced control
    • Welding coordinates can be directly imported from Gerber data, allowing high-speed welding at any position on the board edge or within the circuit pattern using four independently operating heads.
  • Improved quality and stability
    • The welded parts are flat and smooth, suppressing the effects of thermal expansion and contraction during lamination pressing. This reduces stress within the board, minimizing warpage, deformation, and distortion between inner layer materials.
  • Scalability and automation compatibility
    • Compatible with all lamination materials (FR-4, High-Tg, Rogers, polyamide, etc.). Optional upgrades to full automation are available, such as automatic transfer to the receiving unit and automatic interleaf insertion.

Benefits of introducing MRC-700A

  • Applications: High-precision interlayer positioning and temporary welding in multi-layer board mass lamination processes and build-up methods.
  • Benefits of Introduction: Reduction of positioning misalignment, uniform board thickness across the entire board, suppression of warpage. Cost reduction for reference hole drilling processes and positioning tools, elimination of accumulated errors.

InduBond PLR Product Specifications

ItemContent
Max Inner Layer SizeL750 x W610 mm
Min Inner Layer SizeL304.8 x W304.8 mm
Weldable Board Thickness (Max)10 mm
Weldable Board Thickness (Min)No limit
Min Layer Thickness25μm
Tracing Accuracy / Repeatability±15μm / ±10μm
Number of CCD Cameras4 + 4 units or 8 + 4 units
Max Welding Temperature350°C
Electrical Capacity (Max Power)6kW(400V-3P+N+G-50/60Hz)
Max Current / Rated Current11A / 16A
Max Air Pressure / Operating Air Pressure1.0MPa / 0.6MPa
Air ConsumptionApprox. 267 NL/min.
Water Cooling Connection: Water Temperature10°C ~ 18°C
Water Cooling Connection: Rated Flow Rate1.67L/min.
Noise Level65dB or less (at operator's position)
Standard AccessoriesMain unit, loading/receiving station, transfer unit, 4 sets of heads/controllers, suction plate with camera/tracing table, PC set, technical documents, etc.

Inquire by phone

053-414-6111

Business hours: 9:00 - 17:00


Inquire by email