Batch processing of 40 stacked unwanted protrusions after router processing, achieving a departure from manual labor

The IBK-250B is a PCB edge burr remover (ROUTER BURR REMOVER) designed to remove unwanted protrusions remaining after router processing. Unlike conventional manual work performed one board at a time, it can process up to 40 boards (for 1.6mm thick boards) stacked together in a single batch.

Features of IBK-250B

  • Efficient Batch Processing
    • For 1.6mm thick boards, up to 40 boards can be stacked and processed in a single batch to remove protrusions.
    • Even with 40 stacked boards, it achieves a short processing cycle time of approximately 10 seconds.
  • Precise Finish and High Rotational Speed
    • By adopting a dedicated diamond cutter, it achieves a clean finish.
    • With a high spindle speed of up to 18,000 rpm, it supports precise processing.
  • Space-Saving, Compact Design
    • Its compact design, fitting within a 500mm x 520mm footprint, allows for flexible installation.

IBK-250B Product Specifications

ItemDescription
Product NameIBK-250B PCB Edge Burr Remover
Applicable Board Size (Max.)320mm×250mm
Applicable Board Size (Min.)70mm×70mm *Consultation required for sizes other than those listed above
Stack Thickness0~70mm
Processing Accuracy±0.1mm
Processing Cycle TimeApprox. 10 seconds / 40 stacked boards
Spindle Speedmax.18,000rpm.
Power Supply3-phase AC/200V 1.2KVA
Air Supply0.5MPa. 10Nℓ/min.
Machine Dimensions500W×520L×1,025H mm
Machine WeightApprox. 65kg

Inquire by phone

053-414-6111

Business Hours: 9:00 - 17:00


Inquire by email