High-Torque Cut Saw Supporting Max. 1,500mm Stroke and Automatic Cutting of 15 Stacked Glass Epoxy Substrates

The ACS-1500A is a device capable of automatically cutting multiple full-size raw boards, such as glass epoxy substrates, stacked together, with a maximum processing stroke of 1,500mm. The main spindle's servo motorization achieves a wide range of rotational speed control and high torque, and it can be easily operated with dedicated interactive software.
Air Floating Table

When positioning the workpiece, air ejected from the table creates a film between the table and the underside of the workpiece, preventing scratches due to friction and ensuring smooth workpiece transfer.
Workpiece Chucking

When positioning the workpiece, this belt moves in sync with the workpiece, preventing scratches on the workpiece during processing.
Operation Panel

With dedicated interactive software, no special training for operators is required, allowing immediate use upon introduction. Up to 60 processing patterns can be stored.
Processing Head

Improved sealing of the dust collection circuit and processing head has significantly enhanced noise reduction and dust collection efficiency.
New Chucking Device

By adopting a new chucking method, the groove in the workpiece clamp plate where the chucking enters has been reduced to 5mm, further improving the workpiece clamping force during processing.
Automatic Operation Screen

Features of ACS-1500A
- High Output with Main Spindle Servo Motor
- Motor torque has increased by more than 5 times compared to conventional 3-phase motors.
- Rotational speed can be freely and widely adjusted.
- High-Precision Workpiece Holding and Transfer Mechanism
- Workpieces are securely chucked at 12 points and synchronized with the pull-in conveyor, enabling high-precision cutting with reduced scratches and dents.
- By adopting a split clamp, workpieces are firmly secured, allowing up to 15 sheets of 1.6t substrates to be cut simultaneously.
- Air Floating Set Table
- The processing table adopts an air floating system. This facilitates workpiece positioning and helps prevent scratches during setup.
- Advanced Control and Safety Design
- Over 60 processing patterns can be registered.
- During edge trimming (powder cutting), the cutting speed is automatically changed to the preset speed.
- A safety design is adopted that displays processing distance and alarm messages on the screen.
ACS-1500A Product Specifications
| Item | Content |
| Target Workpiece Size (Max) | 1,500mm (Length) × 1,500mm (Width) |
| Target Workpiece Size (Min) | 200mm (Length) × 200mm (Width) |
| Max Stacking Thickness | 25mm (35mm possible with option) |
| Number of Stacked Sheets for Cutting (1.6t) | Glass Epoxy: Max 10 sheets / Phenol: Max 15 sheets |
| Processing Accuracy | Within set value ±0.1mm |
| Cutter Feed Accuracy | ~10m/min. (Normal cutting speed: 5m/min. for glass epoxy substrates) |
| Main Spindle Speed | 3,000rpm. (Servo type) |
| Control Method | NC Control |
| Power Supply | 3-phase AC200/220V / 18KVA (including dust collector) |
| Air Consumption | 180NL/min. 0.5Mpa. |
| Machine Outer Dimensions | 3,280(W)×3,925(L)×1,935(H)mm (including input/output) |
| Machine Weight | 3,425kg |
