Achieving a superb board edge finish with a high-speed spindle and diamond router, suppressing burrs and copper foil peeling

The FFR-620M is a machine that finishes and trims the edges of copper-clad laminated boards after cutting, forming a high-quality finished surface. By combining a high-speed spindle, a dedicated diamond router bit, and a special clamping mechanism, it minimizes burrs, debris, peeling of ultra-thin copper foil, and knife marks during processing.

Automatic Operation Screen
Floating Table
Finishing Trimming Unit

Features of FFR-620M

  • High-Quality Edge Finish
    • By adopting a dedicated diamond router bit and a special clamping mechanism, it provides a superb finished surface.
  • High Productivity and Simultaneous Processing
    • Since products are stacked and processed simultaneously, productivity is significantly improved.
    • R-processing and chamfering of corners can be performed simultaneously (Optional for sizes other than 3R, 5R).
  • Clean and Quiet Working Environment
    • The full enclosure of the device enhances quietness and achieves a clean working environment.
  • Intuitive Operability
    • It adopts a touch panel screen system, allowing for smooth operation.

Applications and Benefits of FFR-620M

  • Applications: Edge finishing and trimming of copper-clad laminated boards after cutting, and corner R/chamfer processing.
  • Benefits of Introduction: Improved edge processing quality (suppression of burrs, debris, and copper foil peeling), increased productivity through stacked cutting, and improved working environment.

FFR-620M Product Specifications Table

ItemContent
Target Workpiece Size (Max)620mm (Length) × 620mm (Width)
Target Workpiece Size (Min)340mm (Length) × 340mm (Width)
Stacking HeightMax 28mm (including top and bottom plates)
Cutting AmountMax 1mm (per side)
Processing Tact Time (Book)170 sec / book
Processing Tact Time (Single Sheet Conversion)10 sec / sheet (at material feed speed of 25m/min.)
Conveyor Speed17~25m/min.
Operation MethodTouch Panel Screen System
Outline AccuracyWithin 0.2mm
Right Angle AccuracyWithin 0.2mm (Z dimension at 600mm)
Diagonal AccuracyWithin 0.7mm
Parallelism AccuracyWithin 0.1mm
Straightness AccuracyWithin 0.1mm
R Processing Accuracy-0mm, +1.0mm
Power Supply3-phase AC/200/220V
Air Consumption300NL/min 0.5MPa
Machine Dimensions2,000(W)×2,129(L)×2,043(H)mm
Machine WeightApprox. 2,300kg

Inquire by phone

053-414-6111

Business Hours: 9:00 - 17:00


Inquire by email