Inline processing of two steps, corner chamfering and marking after outer perimeter finishing, with a single device

The CFN-700A is a corner chamfering + marking device that can perform inline corner chamfering of multi-layer boards after outer perimeter finishing without burrs, and simultaneously perform marking with a single unit. It supports the construction of efficient production lines by loading and unloading substrates based on the center.



(Optional)
Features of CFN-700A
- Two processes integrated into one unit
- Two processes, corner chamfering and marking, can be performed with a single unit.
- High-precision corner finishing and flexible settings
- A high-frequency spindle motor (max. 20,000 r.p.m.) achieves a clean corner finish.
- The corner R can be changed via the touch panel (2R to 5R), and C-chamfering is also possible as an option.
- Stable marking function
- The servo-controlled stamping unit enables stable marking.
- The marking position can be set via the touch panel, and air-pen or ultrasonic marking units are also supported as options.
- Compatibility with a wide range of substrates and expandability
- Supports processing of thin materials from 0.1mm.
- Can be connected to edge chamfering machines, board thickness measuring machines, etc.
CFN-700A Product Specifications Table
| Item | Content |
| Target Workpiece Size (Max) | 700mm (Length) × 700mm (Width) |
| Target Workpiece Size (Min) | 300mm (Length) × 300mm (Width) |
| Target Workpiece Thickness | 0.1mm to 2.4mm |
| Machine Capability: Positioning | Positioning by servo motor |
| Machine Capability: Cutter Speed | 20,000rpm. (Inverter variable type) |
| Power Supply (with dust collector) | 3-phase AC/200V 8KVA |
| Air Consumption | 0.5MPa. |
