Automatic Pass/Fail Judgment of Dummy Hole Diameters on Printed Circuit Boards with High-Resolution Camera Measurement

The NCH-250 is a device that automatically measures the diameter of dummy (completed) holes, created by drills used in through-hole processing of printed circuit boards, using a high-resolution camera. Based on the measured data, it automatically performs OK/NG judgments.

Dummy (Completed) Hole Measurement Unit
Workpiece Receiving Unit
Stop Guide Handle Unit
USB Input Port
Sample Board
Calibration Jig

Features of NCH-250

  • High-Precision Automatic Measurement and Judgment Function
    • Automatically measures the diameter of dummy (completed) holes drilled in the corners of the board using a high-resolution camera and performs pass/fail judgment.
    • Achieves a measurement accuracy of ±0.02mm (±20μ).
  • Efficient Measurement Process
    • Supports up to 40 measurement holes and has the processing capability to measure 30 holes in approximately 20 seconds.
  • Convenient Data Management
    • Measurement results can be displayed and recorded on a PC.
    • Supports data recording via a printer as an option.

Applications of NCH-250

  • Applications: Management of drills used after through-hole processing of printed circuit boards and measurement of dummy hole diameters.

NCH-250 Product Specifications

ItemDescription
Product NameNCH-250 Dummy (Completed) Hole Measuring Instrument
DimensionsOverall Width 265mm × Overall Length 555mm × Overall Height 520mm
Weight17kg
Workpiece Dimensions (Max)700mm × 700mm
Workpiece Thickness0.1~3.2mm
Hole Diameter0.1~5.0mm
Measurement Range30 × 250mm
Number of Holes MeasuredMax. 40 holes
Measurement Accuracy±0.02mm (±20μ)
Measurement TimeApprox. 20 seconds for 30 holes
Data DisplayPC
Data RecordingPC (Printer Option)
Input Power SupplyAC100V

Inquire by Phone

053-414-6111

Business Hours: 9:00 - 17:00


Inquire by Email