Batch processing of 40 stacked unwanted protrusions after router processing, achieving a departure from manual labor

The IBK-250B is a PCB edge burr remover (ROUTER BURR REMOVER) designed to remove unwanted protrusions remaining after router processing. Unlike conventional manual work performed one board at a time, it can process up to 40 boards (for 1.6mm thick boards) stacked together in a single batch.
Features of IBK-250B
- Efficient Batch Processing
- For 1.6mm thick boards, up to 40 boards can be stacked and processed in a single batch to remove protrusions.
- Even with 40 stacked boards, it achieves a short processing cycle time of approximately 10 seconds.
- Precise Finish and High Rotational Speed
- By adopting a dedicated diamond cutter, it achieves a clean finish.
- With a high spindle speed of up to 18,000 rpm, it supports precise processing.
- Space-Saving, Compact Design
- Its compact design, fitting within a 500mm x 520mm footprint, allows for flexible installation.
IBK-250B Product Specifications
| Item | Description |
| Product Name | IBK-250B PCB Edge Burr Remover |
| Applicable Board Size (Max.) | 320mm×250mm |
| Applicable Board Size (Min.) | 70mm×70mm *Consultation required for sizes other than those listed above |
| Stack Thickness | 0~70mm |
| Processing Accuracy | ±0.1mm |
| Processing Cycle Time | Approx. 10 seconds / 40 stacked boards |
| Spindle Speed | max.18,000rpm. |
| Power Supply | 3-phase AC/200V 1.2KVA |
| Air Supply | 0.5MPa. 10Nℓ/min. |
| Machine Dimensions | 500W×520L×1,025H mm |
| Machine Weight | Approx. 65kg |
