By adopting a two-stage set table, parallel processing and efficiency of lamination and bonding processes are achieved

InduBond 230N is a new generation electromagnetic induction heating bonding machine that laminates and welds inner layers and prepregs of multi-layer boards based on pin alignment. It adopts a two-stage set table, allowing operators to laminate the next board while one board is being bonded, enabling more efficient work. This method eliminates the need for pins and dedicated jigs during lamination pressing, improving the positioning accuracy and reliability of the inner layers.

Features of InduBond 230N

  • Efficient Two-Stage Set Table
    • The interchangeable set table structure allows continuous lamination work during the bonding process, significantly increasing work efficiency.
  • High-Precision Positioning and Stress Reduction
    • Accurate positioning is achieved based on pins (jig plate accuracy 10μm or less), and inner layers are fixed by electromagnetic induction heating.
    • It suppresses the effects of thermal expansion and contraction during lamination pressing, reducing internal stress and warpage of the board.
  • Uniform Heating and Pressurization System
    • With 4 heads (6 heads optional), welding points are uniformly heated and pressurized.
    • The weld marks are flat and smooth, allowing for uniform pressure during the lamination pressing process.
  • Automatic Transfer and Program Control
    • After lamination is complete, the jig plate is automatically transferred to the processing section by a two-point button switch.
    • The heads automatically move to programmed positions, clamp with upper and lower electrodes, and begin bonding.

Applications and Benefits of InduBond 230N

  • Applications: High-precision lamination and temporary welding of inner layers and prepregs for multi-layer boards.
  • Benefits of Introduction: Reduced distortion and misalignment between inner layers, elimination of dedicated jigs during lamination pressing, extended lifespan of SUS plates, and cost reduction for jig plates, pins, etc.

Product Specification Table for MRC-700A

ItemContent
Max Inner Layer SizeL750 × W650mm
Min Inner Layer SizeL250 × W250mm
Weldable Plate ThicknessMax 10mm
Machine WeightApprox. 900kg
Electrical Capacity3kW (400V-3P+N+G-50/60Hz)
Air Pressure0.6MPa
Suction RelatedDuct Diameter: 80mm / Flow Rate: 9.6m³/min.
Standard AccessoriesMain Unit, Automatic Head Positioning Function, Data Management PC, 4 Sets of Bonding Heads, Dedicated Jig Plate, Instruction Manual, Technical Documents, etc.
Options2 Additional Sets of Bonding Heads and Controllers (Recommended for large boards)

Contact by Phone

053-414-6111

Business Hours: 9:00 - 17:00


Contact by Email