Vertical design saves space, and digital display and rack-and-pinion ruler allow for easy setup and a wide range of board processing.

The WCS-1300A is a cut saw that adopts a simple mechanism and covers a wide range of board processing. Its vertical design minimizes installation space while accommodating boards up to 1,300mm in size.
Features of WCS-1300A
- Space-saving vertical design
- Since the device is vertical, it does not take up much installation space.
- Improved visibility and operability
- A highly visible digital display is used for dimension display of the cutting position.
- The ruler for setting the cutting position is a rack type, allowing for easy setup with light force.
- Processing capacity through stacked cutting
- Workpieces can be cut in stacks, which improves processing throughput.
WCS-1300A Product Specifications Table
| Item | Content |
| Applicable Workpiece Size (Max) | 1,300mm (Length) × 1,300mm (Width) |
| Applicable Workpiece Size (Min) | 100mm (Length) × 100mm (Width) |
| Max Stacking Thickness | 25mm |
| Processing Accuracy (Straightness of processed edge) | Within ±0.1mm (when processing 1.6t) |
| Spindle Speed | 3,000rpm. (Servo type) |
| Control Method | NC Control |
| Power Supply (with dust collector) | 3相AC200/220V / 6.47KVA / 19A |
| Air Consumption | 30NL/min. 0.5Mpa. Dry Clean Air |
| Machine Dimensions | 1,950(W)×1,670(L)×2,520(H)mm |
| Machine Weight | 1,250kg |
| Remarks (Cutting Speed Guideline) | ~10m/min. (Normal cutting speed 5m/min. Glass epoxy board) |
