Achieving a superb board edge finish with a high-speed spindle and diamond router, suppressing burrs and copper foil peeling

The FFR-620M is a machine that finishes and trims the edges of copper-clad laminated boards after cutting, forming a high-quality finished surface. By combining a high-speed spindle, a dedicated diamond router bit, and a special clamping mechanism, it minimizes burrs, debris, peeling of ultra-thin copper foil, and knife marks during processing.




Features of FFR-620M
- High-Quality Edge Finish
- By adopting a dedicated diamond router bit and a special clamping mechanism, it provides a superb finished surface.
- High Productivity and Simultaneous Processing
- Since products are stacked and processed simultaneously, productivity is significantly improved.
- R-processing and chamfering of corners can be performed simultaneously (Optional for sizes other than 3R, 5R).
- Clean and Quiet Working Environment
- The full enclosure of the device enhances quietness and achieves a clean working environment.
- Intuitive Operability
- It adopts a touch panel screen system, allowing for smooth operation.
FFR-620M Product Specifications Table
| Item | Content |
| Target Workpiece Size (Max) | 620mm (Length) × 620mm (Width) |
| Target Workpiece Size (Min) | 340mm (Length) × 340mm (Width) |
| Stacking Height | Max 28mm (including top and bottom plates) |
| Cutting Amount | Max 1mm (per side) |
| Processing Tact Time (Book) | 170 sec / book |
| Processing Tact Time (Single Sheet Conversion) | 10 sec / sheet (at material feed speed of 25m/min.) |
| Conveyor Speed | 17~25m/min. |
| Operation Method | Touch Panel Screen System |
| Outline Accuracy | Within 0.2mm |
| Right Angle Accuracy | Within 0.2mm (Z dimension at 600mm) |
| Diagonal Accuracy | Within 0.7mm |
| Parallelism Accuracy | Within 0.1mm |
| Straightness Accuracy | Within 0.1mm |
| R Processing Accuracy | -0mm, +1.0mm |
| Power Supply | 3-phase AC/200/220V |
| Air Consumption | 300NL/min 0.5MPa |
| Machine Dimensions | 2,000(W)×2,129(L)×2,043(H)mm |
| Machine Weight | Approx. 2,300kg |
