Multilayer Board Finishing Machine ZRS-680A: Automating Outer Edge Cutting and Corner Processing After Multilayer Pressing in a Single Unit

The ZRS-680A is a finishing machine that automatically performs outer edge cutting and corner R-processing on multilayer boards after multilayer pressing. It adopts a design that minimizes dust generation and can handle a wide range of workpiece thicknesses, from thin to thick.

Features of ZRS-680A

  • Reduced Dust Generation with Hybrid Dust Collection
    • By adopting a hybrid dust collection system, dust generation during processing is reduced.
  • Burr Suppression with Synchro Cut
    • The Synchro Cut function enables cutting with suppressed burr generation, even for thin substrates.
  • Adaptability to a Wide Range of Board Thicknesses
    • It can accommodate a wide range of board thicknesses, from thin to thick.
  • Full Automation from Loading to Unloading
    • A series of processes, from workpiece loading, outer edge finishing, R-processing, to unloading, are automatically performed by a single unit.

Applications and Benefits of ZRS-680A

  • Applications: Outer edge cutting and corner R-processing after multilayer pressing.
  • Benefits of Introduction: Since the entire process from loading to unloading can be completed with a single unit, it realizes a space-saving and efficient automated processing line. Furthermore, hybrid dust collection and Synchro Cut enable clean and high-quality finishing.

ZRS-680A Product Specifications Table

ItemSpecification
Applicable Workpiece Size (Max)680mm × 630mm (after cutting)
Applicable Workpiece Size (Min)300mm × 300mm (after cutting)
Board Thickness0.1mm~10.0mm (*0.4mm or less, 5.0mm or more are optional)
Outer Dimension AccuracyWithin ±0.1mm
Accuracy from Reference Pin Hole to End FaceWithin ±0.2mm
Right Angle AccuracyWithin 0.3mm
Machine Dimensions2,000(W) × 3,200(L) × 2,295(H)mm

Inquiries by Phone

053-414-6111

Business Hours: 9:00 - 17:00


Inquiries by Email