CFN-700C: In-line Burr-Free Corner Chamfering and Marking Device for Multilayer Boards After Outer Perimeter Finishing

CFN-700C is a device that performs in-line corner R-chamfering and marking processes for multilayer boards that have completed outer perimeter finishing. While integrating two processes into one unit, it supports thin substrates from 0.1mm and achieves a clean finished surface by suppressing burr generation with a high-frequency spindle motor.

Features of CFN-700C

  • Supports two processes: corner R-chamfering and marking, with one unit
    • The two processes of corner R-chamfering and marking can be completed within a single device.
  • Selectable Marking Method
    • The marking function can be selected from air-pen type or ultrasonic-pen type.
  • Support for Thin Substrates
    • Processing is possible even for thin substrates from 0.1mm.
  • Center-referenced Conveyance
    • Substrate loading and unloading are performed based on the center.
  • R-size Change via Touch Panel
    • The R-size for processing can be changed within the range of 2R to 5R via touch panel operation.
  • Clean Finished Surface with High-Frequency Spindle
    • By adopting a high-frequency spindle motor, burr generation is suppressed, achieving a clean finished surface.

Applications and Benefits of Introducing CFN-700C

  • Applications: In-line corner chamfering and marking for multilayer boards after outer perimeter finishing.
  • Benefits of Introduction: Since two different processes, corner R-chamfering and marking, can be performed with a single device, space-saving in the process is possible. Furthermore, it supports selection of marking methods and R-size (2R to 5R) changes via touch panel, allowing for flexible operation according to specifications.

CFN-700C Product Specifications Table

ItemSpecification
Target Workpiece Size (Max)700mm × 700mm
Target Workpiece Size (Min)300mm × 300mm
Board Thickness0.1mm - 2.4mm (*0.4mm or less is optional)
Device Dimensions2,000(W) × 1,987(L) × 1,675(H)mm

Inquire by phone

053-414-6111

Business Hours: 9:00 - 17:00


Inquire by email